New type gas powered hydraulic pump SY-BQ-80

New type double hose gas powered hydraulic pump SY-BQ-80

SY-BQ-80 gas powered hydraulic pump utilizes the power generated by a small gasoline engine to drive the hydraulic oil in the tank to provide energy for various crimping tools and hydraulic tools through the centrifugal force generated by the crankshaft rotation. It has the advantages of small size, strong maneuverability, high pressure, light weight, simple structure, easy use, beautiful appearance, quick connection of oil pipes to hydraulic tools, and good cooling conditions for the engine.

1. Product Application:
This gas powered hydraulic pump, as a hydraulic power source, is mainly used in conjunction with various professional hydraulic tools; It is divided into single and double oil circuit, suitable for hydraulic crimping heads, hydraulic jacks, hole punchers, cable cutters, nut cutters, copper bar bending, cutting and other tools. After being matched with these hydraulic tools, the pump can perform various tasks such as wire crimping, lifting, punching, molding, bending, straightening, shearing, assembly, and disassembly. It can significantly reduce labor intensity and improve work efficiency.

2. Technical parameters:

3. Product features：
1. With a large oil storage capacity, it can withstand high-capacity crimping equipment and is suitable for long-term operation without causing engine overheating.
2. The crimping speed is fast, with an average of about 6 seconds per crimping to complete.
3. Adopting a high and low pressure dual speed automatic switching design (with high and low pressure two-stage pressure output, automatic conversion, and accelerated crimping time), it can easily drive hydraulic crimping heads such as 60T, 100T, 200T, 300T, etc
4. The rated working pressure is 80Mpa, and the maximum working pressure can reach 85Mpa. A safety overflow protection valve is designed to provide good protection for the crimping equipment.
5. It has efficient, fast and excellent output performance.
6. Simple structure, easy operation, and lightweight weight.

7. Dual circuit manual control, internally designed hydraulic crimping head return pressure protection system. Internal design hydraulic crimping head return pressure protection system.
8. Design a safety overflow protection valve to effectively protect the crimping equipment.
9. Low noise, as low as 70 decibels, belonging to environmentally friendly gasoline engine hydraulic pump
10. Equipped with a pressure gauge for easy and clear viewing of technical parameters such as work pressure:
11.1. Engine speed: 3600 rounds revolutions per minute; 2. Fuel tank capacity: 10L; 3. High pressure flow rate: 2.5L/min; Low pressure flow rate: 10-11L/min; 4. Pressure: 800 bar; 5. Net weight: 65kg (excluding hydraulic oil); 6. Packaging: cardboard or wooden box
12. Can use aviation hydraulic oil and operate at ambient temperatures ranging from -30 ° C to 55 ° C
13. No preparation time is required, and the connection working state can be maintained while moving the hydraulic tools simultaneously.
14. Equipped with a pressure gauge, it is convenient to read the work pressure clearly and observe the pressure changes during work at any time.
15. The gas powered hydraulic pump is equipped with a pressure overload protection device to prevent damage caused by overpressure; And the device has a pressure holding function, which can quickly press up to complete the crimping work.
16. The hydraulic oil tank and connection are made of high-strength aluminum alloy, which is lightweight and strong. It is a new type of gas powered hydraulic pump developed by us based on similar foreign products.

4. Application method
When using, the exhaust nut should be opened and the quick connector should be connected to the quick connector on the matching hydraulic tools. Start the engine and wait for it to rotate for 1-2 minutes. Place the work lever in the boost state. At this time, the output hydraulic oil will perform various tasks, and the output hydraulic oil will automatically boost with the increase of load to perform various tasks until 80MPA. After the work is completed, turn off the engine and wait for the hydraulic oil to return. Remove the quick connector, tighten the air release nut, and let it cool down.

5. Maintenance precautions
1. The engine uses 20 # lubricating oil.
2. The oil storage capacity must be within the range above the oil window.
3. Every time adding refueling or changing oil, it is necessary to filter it with an 80 mesh or higher oil filter, and the oil tank must be cleaned before replacement. The oil change period is six months.
4. The working oil temperature ranges from 10 degrees Celsius to 55 degrees Celsius.
5. Before starting the engine, open the ventilation nut and place the switch in the unloading position.
6. If the engine temperature is found to be too high during use, it should be stopped. Cool it down before use.
7. The pump has been adjusted before leaving the factory and should not be raised arbitrarily. When it needs to be readjusted, a pressure gauge must be used.
8. The high-pressure oil pipe has passed the 105MPA high-pressure test before leaving the factory. However, due to the easy aging of hydraulic oil pipes, users need to check them regularly, usually for six months and frequently for three months. During the inspection, a pressure test of 87.5MPA is used. If there are any damages, protrusions, leaks, etc., they cannot be used.
9. Bearings are usually cleaned once every six months, and lubricating grease needs to be added during assembly.

6. Faults and troubleshooting methods